sierra 2wd cosworth rolling shell
Posted: Mon Nov 02, 2009 8:22 pmSierra cosworth rolling shell 2wd
Has wicked plate spells "F5 COS RW" (if spaced correctly
)
In VERY good condition only bit of rust is on the passenger door by the window and couple of bubbles on roof
front and rear arches were done when resprayed 2 years ago in base white, so no worries there.
the underside has only been welded once and was only a small patch on rear chassis rail
its been fully stone chipped and wax oiled and rear underside and rear arches painted white .
Rear beam and trailing arms painted black with all good std bushes fitted
front end poly bushed.
Bad bits are :
4x4 Bonnet could do with blow over paints a little worse for ware and its got bonnet pin holes in it.
one boot hinge needs attention .
Car is as is in the picture parts listed below have been removed and are not included
Engine+Aux (rad i.c ,turbo ,hoses etc)
Gear box
Prop
Diff
Engine loom + ecu
Exhaust
Brakes
Seats
Door cards
C pillar trims
fog surrounds
Wheels
3door white dial clocks (170mph)
I also have some spare parts that can be purchased separately please ask if interested.
Mint 40k 7.1/2" diff
prop
carbon fibre fog light surrounds
std 2wd intercooler
polished inlet 2wd
front strut brace
3door 170mph white dial clocks
You will need to bring your own wheels and collect on low loader/recovery.
pics here
http://www.pistonheads.com/sales/1279340.htm
Has wicked plate spells "F5 COS RW" (if spaced correctly
)In VERY good condition only bit of rust is on the passenger door by the window and couple of bubbles on roof
front and rear arches were done when resprayed 2 years ago in base white, so no worries there.
the underside has only been welded once and was only a small patch on rear chassis rail
its been fully stone chipped and wax oiled and rear underside and rear arches painted white .
Rear beam and trailing arms painted black with all good std bushes fitted
front end poly bushed.
Bad bits are :
4x4 Bonnet could do with blow over paints a little worse for ware and its got bonnet pin holes in it.
one boot hinge needs attention .
Car is as is in the picture parts listed below have been removed and are not included
Engine+Aux (rad i.c ,turbo ,hoses etc)
Gear box
Prop
Diff
Engine loom + ecu
Exhaust
Brakes
Seats
Door cards
C pillar trims
fog surrounds
Wheels
3door white dial clocks (170mph)
I also have some spare parts that can be purchased separately please ask if interested.
Mint 40k 7.1/2" diff
prop
carbon fibre fog light surrounds
std 2wd intercooler
polished inlet 2wd
front strut brace
3door 170mph white dial clocks
You will need to bring your own wheels and collect on low loader/recovery.
pics here
http://www.pistonheads.com/sales/1279340.htm
