Post pics of your finished motors NOT A PROJECT or just browse at some of the members. THIS IS NOW A HIDDEN ROOM FROM PUBLIC. People in this room are trusted and expected to keep things they read and see to them selfs
A few pictures of the almost finished project.
About time I got some of it on her me thinks
Hope you enjoy
We are awaiting the charge air carrier pipe that goes over the rocker to come back from the engineers so we can tap in the water injection jet, so thats one thing thats missing from the photos, got a bog standard one on there at mo but hopefully real soon we'll have the nice blinging shinney one back
Last edited by zetec-turbo on Mon Aug 28, 2006 7:28 pm, edited 3 times in total.
looks mint mate just one thing is your bonnet ok without bonnet pins witht the lifters just heard a few stories of bonnets flying open without the pins
Bonnet seems fine matey, have got a set of pins here at home but jsut aint fitted them as it seems secure to me, done 1.5k miles in it with runs up and down the dual carrage ways at errr......good speeds *cough Cough* and all's been well.
cheers mate quite fancy getting the bonnet blocks for my car aswell as gets a bit hot under there sometimes was just a bit unsure without the pins.does look minted tho
[email protected] Tel (0044) (0)7984 071 567 Junction 28 / 29 off the M25.RomfordEssex RM3 oddkiddcreations.co.uk/shop [url=http://www.oddkiddcreations.co.uk/viewforum.php?f=9] Click sig for parts section.
Well with this engine it had 269.5bhp, BUT that was with a few problems with the engine and other things that was restricting us with the power.......i.e. the compression of the pistons that was supplied to me by Burtons was wwwaaaaayyyyyyyyy to much ie 10:1 and also had an air leak in the Intercooler that was far from helping with things
Am just about to update a few pics on the thread about my new engine
Have a look there for updates
My advise to anyone wanting pistons for a ZT in future would be to get them straight from the U.S. they are chearper and excellent pistons, ie JE, Arias etc. Avoid Accralite and Burtons
Need to get the tracking done at Elite maytee.. I took the S1 down there today. Toe angles and tie bars were well out Only costs ?23
[email protected] Tel (0044) (0)7984 071 567 Junction 28 / 29 off the M25.RomfordEssex RM3 oddkiddcreations.co.uk/shop [url=http://www.oddkiddcreations.co.uk/viewforum.php?f=9] Click sig for parts section.
Well I've finally got around to getting the Air Injectors wired up and also have got around to fitting the cage in. All looks good and has nearly everything fitted now
Things are never finished tho are they still got a few things that I'm gunna get for it as yet, ie coil overs and adjustable rear set up next
anyway some pics of the cage and the air injectors all plumbed up
[email protected] Tel (0044) (0)7984 071 567 Junction 28 / 29 off the M25.RomfordEssex RM3 oddkiddcreations.co.uk/shop [url=http://www.oddkiddcreations.co.uk/viewforum.php?f=9] Click sig for parts section.